Bimar VT16, Instruction Booklet

Page: 7 / 24

7/24

Make sure that the fan works correctly: if not, turn it off and have it checked by
a qualified professional.

Do not leave the appliance exposed to the weather (sun, rain, etc..).

Do not touch the appliance with wet hands or feet.

Do not pull on the power cord to move the appliance.

If the power cord is damaged, it must be replaced by the manufacturer or its
technical assistance centre or by someone who is similarly qualified, in order to
prevent any risks.

This appliance is not to be used with an external timer or with a separate
distance control unit. This is to prevent fire hazards should the appliance be
covered or incorrectly positioned.No other device that turns the appliance on
automatically must be used, thus preventing any injury to people or animals or
damage to objects.

If there is a fault or the appliance is not working correctly, switch it off and have
it checked by a qualified professional. Repairs done by an unqualified person
can be dangerous and cause the guarantee to become void.
INSTALLATION

After removing the packing materials, check the integrity of the heater; if you are
unsure, do not use it and ask for qualified professional help. The packing materials
(plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children
because they are potential sources of danger.

Before connecting the appliance, check that the voltage values shown on the data
plate correspond to those of the AC/DC adaptor or PC.

The connector USB must be easy to reach so the plug can be removed quickly in case
of emergency.

To not place the appliance near sinks or other container of liquids (minimum distance of
2 meters) to avoid the risk of it falling in.

Do not place the appliance near an open flame, cooking or other heating appliance.

Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could
obstruct the air intake grille; make sure that the front is free of unstable materials (dust,
etc.).

Make sure that the electric cord is not touching rough, hot or moving surfaces and not
twisted or wrapped around the appliance.

Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined
plane (the appliance could upset).
USE
Before each use, ensure that the appliance and the battery are in good working order,
and that the power cord is not damaged: if the cord is damaged, it must be replaced by
the manufacturer or its service centre or by someone with a similar qualification in order
to prevent any risks.

Place the appliance on a flat, stable surface.

Open the flap at the back and check the correct position and polarity of the battery
(type: 3.7V 2000 MA KPY). Thereafter close the back flap.