34/40
Settings and customisations.
Open the smartphone screen and press
in the bottom right corner to customise the following
functions: Home management, Message centre,Assistance centre,Configure (audio, alerts, info,
cache memory clear).
Press
in the bottom centre to customise operation of the device to suit the various scenarios or
operating situations provided by the APP (for example: Back home, Leaving home, Dawn,
Goodnight, Temperature, Humidity, Weather, Air quality, Dawn/dusk) or in combination with other
devices.
Press
in the bottom left corner and then in the top of the screen, for example:
to
customise (update and/or change where permitted) the appliance's position or the outdoor wind
speed, air pressure, humidity and temperature (see right).
Press
top right to customise the following: Change Device name, Device position, Check
Network, Third-party devices upported: Amazon Alexa, Google Assistant, Device, sharing, Create a
Comment group, Device Info, Feedback, Update Firmware
The smartphone must be connected to Wi-Fi or cellular data network for remote control.
Voice control
The device is compatible with Amazon Alexa and Google Assistant voice controls. Open the
corresponding App/connect the Skill (make sure that the account and password used are the same
as those of the “Bimar Live Smart” app) and follow the settings.
Google Home: some basic vocal commands are:
-
“OK Google” or “Hey Google”, turn on XX (name of the device)
-
“OK Google” or “Hey Google”, turn off XX (name of the device)
-
etc.
Amazon Alexa: some basic vocal commands are:
-
“Alexa”, turn on XX (name of the device)
-
“Alexa”, turn off XX (name of the device)
-
etc.
Note: the voice control has preset functions, our customer service ([email protected])
is always available to send an updated list of controls supported by the devices.
Use via smartphone
The "
" button deactivates the function and puts the fan
in Stand-by mode; press it again to activate the function.
The "
" button: move the cursor to adjust the speeds (1-
6).
Mode: The fan starts in normal mode when switched on, i.e.
ventilation is constant at the selected intensity.
Summary of Contents for KBS-6006
Page 39: ...39 40...
