30/40
If the remote control is not controlling the fan:
- Connect the receiver and the remote control: Press the "ON" button and, within 10 seconds,
press the "
" button for 5 seconds: the audible "Beep" indicates proper synchronisation.
- Check the batteries: that they are charged, correctly inserted, and that they meet the
electrical contacts.
- Reset the device, then switch off the power supply for about 20 seconds (main switch pos.
"O " -off-), then turn on the power again (main switch pos. " I " -on-) and press the "
"
button for about five seconds.
①
,
②
, …
⑥
Intensity. The buttons adjust the ventilation
(6 intensities): 1= minimum speed , 6= maximum speed.
Mode: The fan starts in normal mode when switched on,
i.e. ventilation is constant at the selected intensity. If the
"
" button is pressed, it switches to "Natural" mode:
the ventilation alternates speeds in a schematic manner,
as shown below, for example:
“6” speed set:
“3” speed set:
“5” speed set:
1H, 2H, …8H Timer. The buttons operate the timer after which the fan will turn off. The
time (hour) corresponds to the time indicated on the button: 1H= 1 hour, 2H= 2 hours, 4H=
4 hours, 8H= 8 hours.
Direction. The button selects clockwise or counterclockwise rotation (Summer/Winter):
thus, the air is directed from the bottom to the top or vice versa. Only activate this function
if the motor has stopped completely.
“
”: The button deactivates the ventilation and the timer, and puts the fan in Stand-by
mode.
Summary of Contents for KBS-6006
Page 39: ...39 40...
