ASSEMBLY
9
Tool rest
Carriage bolt
Tool rest knob
INSTALLING THE TOOL RESTS
1. Place the right tool rest over the tool rest
bracket and align the slots.
2. Slide the carriage head tool rest screw
through from the left side. Screw the tool
rest knob onto the carriage bolt to hold
the tool rest in place.
3. Adjust the tool rest within 1/16 inch of the
grinding wheel.
To adjust: loosen the knob, shift the tool
rest, then, tighten the knob.
4. Repeat on the left side.
I
O
Washer
Hex head bolt
Clamp bracket
Eye shield
INSTALLING THE EYESHIELD
1.Attach the right eye shield arm to the
bench grinder using the bracket, flat
washer and bolt supplied.
2. Fit the lens to the lens holder as shown.
3. Repeat for left side eye shield.
NOTE: Adjust the eye shields to an
appropriate distance from the tool rests
avoiding interference during operation.
1.Place the spark deflector against the wheel
guard and secure into place using a screw.
Adjust the spark deflector within 1/16”
(0.0625") ofthe grinding wheel and tighten
the screw.
Spark deflector
Phillips head screw
Lock washer
Washer
INSTALLING THE SPARK DEFLECTOR
