SETUP – BEFORE USE
Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS
section at the beginning of this manual including all text
under subheadings therein before setup or use of this
product.
FUNCTION:
1. Power Switch
2. Work Light
3. LED status indicator
4.12V DC output port
5. USB output port
6. Output cable
7. Heavy duty clamp
1
2
3
4
5
6
7
1
2
3
4
1. Air compressor gauge
2. Air compressor switch
3. Air hose compartment
4. AC power input plug
CHARGING THE POWER PACK
WARNING! Always charge on a non-flammable surface.
Press and hold the Battery Test Button on the front
of the unit to check the battery power level.
a. Green light is ready for use.
b. Yellow light needs to be charged.
c. Red light should be charged
immediately.
Turn the Clamp Power Switch on front of unit to the
OFF position.
Note:
Before initial use, completely charge the Power
Pack.
1. Plug the 120VAC Adapter into a 2 or 3-prong
outlet.
2. Slide the Adapter socket on the 120VAC Charging
Input on the back of the Power Pack.
3. The Charging Indicator lights will illuminate in a
cycle from red, to yellow, to green while the unit is
charging.
The green Charging Indicator light
will remain on after charging is complete.
The
battery power level must be checked periodically
when charging, and the Power Pack must be
unplugged when it is fully charged.
NOTE:
FAILURE TO RECHARGE POWER PACK WILL
VOID WARRANTY.
Recharge:
a. When yellow light comes on while pressing the
Battery Test Button.
b. After each Jump-Start.
c. Once a month.
2
