WARNING
This manual contains important safety
instruction, read and understand before
operation!
1. SAVE THESE INSTRUCTIONS.
This manual contains
important safety and operating instructions. You may need to
refer to these instructions at a later date.
2. To reduce risk of battery explosion, follow these
instructions and those published by battery manufacturer and
manufacturer of any equipment you intend to use in vicinity of
battery. Review cautionary marking on these products and on
engine.
Work Area Safety
1. Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
2. Do not operate Power Pack in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. The Power Pack can create sparks which may
ignite the dust or fumes.
3. Keep children and bystanders away while operating the
Power Pack. Distractions can cause you to lose control.
4. Store idle equipment. Always lock up tools and keep out
of reach of children.
Electrical Safety
1. Do not drop a metal tool onto battery. It might spark or
short-circuit battery or other electrical part that may
cause explosion.
2. Do not operate if Power Pack has received a sharp blow,
been dropped, or otherwise damaged in any way; take it
to a qualified technician.
3. Do not leave Power Pack unattended while switched on.
It could result in fire and property damage.
4. Do not expose to rain or wet conditions. Water entering
the Power Pack will increase the risk of electric shock.
5. Do not use an extension cord with this item.
6. Use of an attachment not recommended or sold by the
manufacturer may result in a risk of fire, electric shock, or
injury to persons.
7. To reduce risk of damage to electric plug and cord, pull
by plug rather than cord when disconnecting the Adapter.
8. Do not operate with damaged cord or plug. Replace the
cord or plug immediately.
Personal Safety
1. Wear ANSI-approved splash-resistant safety goggles and
heavy-duty rubber work gloves whenever connecting,
disconnecting, or working near battery. Battery acid can cause
permanent blindness. Avoid touching eyes while working near
battery.
2. Do not use Power Pack while you are tired or under the
influence of drugs, alcohol or medication. A moment of
inattention while operating Power Pack may result in serious
personal injury.
3. Remove personal metal items such as rings, bracelets,
necklaces, and watches when working with a lead-acid battery.
A lead-acid battery can produce a short -circuit current high
enough to weld a ring or the like to metal, causing a severe
burn.
People with pacemakers should consult their physician(s)
before use
Power Pack Safety Warnings
1.Lead-acid batteries generate hydrogen gas when charging.
Hydrogen gas is explosive. Only use the Jump-Start system in
a well-ventilated area.
2.Jump Starting A Vehicle
a. Use the Power Pack for jump starting a LEAD-ACID battery
only.
b. For emergency use only. Do not use the Power Pack as a
replacement for a vehicle battery.
c. Be sure area around battery is well ventilated while battery is
being jump started.
d. NEVER jump start a frozen battery.
e. Do not attempt to jump start a vehicle with a
non-rechargeable or defective battery.
f. Study all battery manufacturer’s specific precautions for jump
starting.
g.
DO NOT TOUCH POSITIVE AND NEGATIVE BATTERY
CLAMPS TOGETHER.
h. Unplug the Power Pack from its Adapter before
connecting its cables to a battery
i. Connect and disconnect battery cable clamps only
after setting any Jump Starter switches to OFF position.
j. Connect cables to proper polarities. Connect black
cable to negative body ground and red cable to positive
battery terminal.
k. Locate Power Pack as far away from battery as
battery cables permit
1
