Billy Goat PW30AOV, Owner'S Manual, Page: 10 / 34

PW30AOV Owner’s Manual
Part No 210500 Form No F021816A
10
OPERATION
CONTROLS
Automatic Cool Down System (Thermal Relief)
If you run the engine on your pressure washer for 3
‑
5 minutes without pressing the trigger on the spray gun, circulating water in
the pump can reach temperatures above 125°-155°F (51°-68°C). The system engages to cool the pump by discharging the
warm water onto the ground.
A - Spray Gun
—
Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - High Pressure Hose
— Connect one end to water
pump and
the other end to spray gun.
C - Spray Tips
— Detergent, 0°, 15°, 25° and 40°: for various
high pressure cleaning applications.
D - Warning/Operating Instructions Tag
— Identifies hazards
and proper procedure to start/stop pressure washer.
E - Air Filter
— Protects engine by filtering dust and
debris out
of intake air.
F - Choke Lever
— Prepares a cold engine for starting.
G - Fuel Valve
— Used to turn fuel supply on/off to engine.
H - Throttle Lever
— Sets engine in starting mode for recoil
starter and stops a running engine.
J - Recoil Starter
— Used for starting the engine manually.
K - Oil Fill/Dipstick
— Check and add engine oil here.
L - Nozzle Extension with Quick Connect
— Allows
you to
switch between five different spray tips
M - Automatic Cool Down System
— Cycles water through
pump when water reaches 125°-155°F (51°-68°C). Warm
water will discharge from pump onto ground. This system
prevents internal pump damage.
N - Water Inlet
— Connection for garden hose.
P - Detergent Siphoning Tube/Filter
— Use to siphon
pressure washer safe detergent into the low pressure
stream.
Q - Identification Label
— Provides model and serial
number of pressure washer. Please have these readily
available if calling for assistance.
R - High Pressure Outlet
— Connection for high
pressure
hose.
S - Pump
— Develops high pressure.
T - Pressure Control Knob
— Varies pressure of high
pressure spray.
U - Fuel Tank
— Fill tank with regular unleaded fuel.
Always
leave room for fuel expansion.