Security
Parameters
Security Mode:
You can disable or enable with WPA or WEP to protect wireless network. The
default mode of wireless security is
Disable
.
RADIUS / 802.1x:
You can disable or enable the RADIUS service.
WEP Authentication:
To prevent an unauthorized wireless station from accessing the data
transmitted over the network, the router offers a secure data encryption, known as WEP. There are
3 options to select from:
Open System,
Shared key
or
both
.
Default Used WEP Key:
Select the encryption key ID; please refer to
Key (1~4)
below.
Passphrase:
This is used to generate WEP keys automatically based upon the input string and a
pre-defined algorithm in WEP64 or WEP128.
Key (1-4):
Enter the key to encrypt wireless data. To allow encrypted data transmission, the WEP
Encryption Key values on all wireless stations must be the same as the router. There are four keys
for your selection. The input format can be either HEX style or ASCII format, 10 and 26 HEX codes
or 5 and 13 ASCII codes are required for WEP64 and WEP128 respectively.
If you want to enable the RADIUS function, check
Enable
and then do the following settings.
RADIUS Server IP Address:
The IP address of RADIUS authentication server.
RADIUS Server Port:
The port number of RADIUS authentication server here. Default value is
1812.
RADIUS Shared Secret:
The password of RADIUS authentication server.
Click Apply to confirm the settings.
54
Summary of Contents for BiPAC 7800
Page 10: ...Important note for using this router 6...
Page 33: ...Step 8 Quick Star is finished You can go to the Status and view the basic information 29...
Page 80: ...76...
Page 84: ...80 4 Enter the AP SSID then click Next 5 Enter the passphrase then click Next...