111
Direction:
Determine whether the rule is for outgoing packets or for incoming packets.
Time Schedule:
A self defined time period. You may specify a time schedule for your prioritization
policy. For setup and detail, refer to Time Schedule section.
Log:
Select Enable for this option if you will like to capture the logs for this Packet filter policy.
Add:
Click this button to add a new packet filter rule and the added rule will appear at the bottom
table.
Edit:
Check the Rule No. you wish to edit, and then click “Edit”.
Delete:
Check the Rule No. you wish to delete, and then click “Delete”.
Reorder:
Be aware that packet filtering parameters appear in priority order i.e. the first one takes
precedence over all other rules. There is a sort function next to the Rule Name column, you can
move the rule to higher or lower priority by clicking the Order arrow, and press “Reorder” to save the
new priority.
Ethernet MAC Filter
A MAC (Media Access Control) address is the unique network hardware identifier for each PC on
your network’s interface (i.e. its Network Interface Card or Ethernet card). Using your router’s MAC
Address Filter function, you can configure the network to block specific machines from accessing
your LAN.
There are no pre-defined MAC address filter rules, you can add the filter rules to you’re your
requirements.
The format of MAC address could be: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
Filter Action
Summary of Contents for BiPAC 7800
Page 10: ...Important note for using this router 6...
Page 33: ...Step 8 Quick Star is finished You can go to the Status and view the basic information 29...
Page 80: ...76...
Page 84: ...80 4 Enter the AP SSID then click Next 5 Enter the passphrase then click Next...