42
PPPoA Connection (ADSL)
PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides access
control and billing functionality in a manner similar to dial-up services using PPP.
VPI/VCI:
Enter the information provided by your ISP.
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric characters
(case sensitive).
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
Auth. Protocol:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
IP Address(0.0.0.0:Auto):
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the
device to automatically obtain an IP address from your ISP.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
MTU:
Maximum Transmission Unit. The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
Click Apply to confirm the settings.
Summary of Contents for BiPAC 7800
Page 10: ...Important note for using this router 6...
Page 33: ...Step 8 Quick Star is finished You can go to the Status and view the basic information 29...
Page 80: ...76...
Page 84: ...80 4 Enter the AP SSID then click Next 5 Enter the passphrase then click Next...