Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router
Chapter 4: Configuration
L2TP Connection - Remote Access
Connection Name:
This allows you to identify this particular connection, e.g. “Connection to
office”.
Type:
Check
Dial Out
if you want your router to operate as a client (connecting to a remote VPN
server, e.g. your office server), check
Dial In
operates as a VPN server.
When configuring your router as a Client, enter the remote
Server IP
Address
(or
Hostname)
you wish to connection to.
When configuring your router as a server, enter the
Private IP Address Assigned to
Dial in User
address.
Username:
If you are a Dial-Out user (client), enter the username provided by your Host. If you
are a Dial-In user (server), enter your own username.
Password:
If you are a Dial-Out user (client), enter the password provided by your Host. If you
are a Dial-In user (server), enter your own password.
PPP Authentication Type:
Default is
Auto
if you want the router to determine the authentication
type to use, or else manually specify CHAP (Challenge Handshake Authentication Protocol) or
PAP (Password Authentication Protocol) if you know which type the server is using (when acting
as a client), or else the authentication type you want clients connecting to you to use (when acting
as a server). When using PAP, the password is sent unencrypted, whilst CHAP encrypts the
password before sending, and also allows for challenges at different periods to ensure that the
client has not been replaced by an intruder.
Idle Time
: Auto-disconnect the VPN connection when there is no activity on the connection for a
predetermined period of time. 0 means this connection is always on.
Click
Apply
after changing settings.
IPSec:
Enable for enhancing your LT2P VPN security.
88