manualshive.com logo in svg

Billion BiPAC 7402G, User Manual, Page: 13 / 146

Share
Download
Billion BiPAC 7402G User Manual Download Page 13

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router 

 

Chapter 3: Basic Installation 

 

 

 

9

Chapter 3: Basic Installation  

BIPAC 7402G can be configured with your web browser. The web browser is included as a standard 
application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The 
product provides a very easy and user-friendly interface for configuration. 

 

PCs must have an Ethernet interface installed properly and be connected to BIPAC 7402G either 
directly or through an external repeater hub, and have TCP/IP installed and configured to obtain an IP 
address through a DHCP server or a fixed IP address that must be in the same subnet as BIPAC 7402G. 
The default IP address of the router is 

192.168.1.254

 and the subnet mask is 

255.255.255.0

 (i.e. any 

attached PC must be in the same subnet, and have an IP address in the range of 192.168.1.1 to 
192.168.1.253). The best and easiest way is to configure the PC to get an IP address automatically from 
BIPAC 7402G using DHCP. If you encounter any problems accessing the router’s web interface it may 
also be advisable to 

uninstall

 any kind of software firewall on your PCs, as they can cause problems 

accessing the 192.168.1.254 IP address of the router. Users should make their own decisions on how to 
best protect their network. 

 

Please follow the steps below for your PC’s network environment installation. Before taking the first step, 
please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter 
must be installed. If not, please refer to your Windows-related or other operating system manuals. 

 

 

 

 

 

 

Any TCP/IP capable workstation can be used to communicate with or
through the BIPAC 7402G. To configure other types of workstations, 
please consult the manufacturer’s documentation. 

Connecting your router 

1. Connect the router to a LAN (Local Area Network) and the ADSL/telephone network. 

2. Power on the device. 

3. Make sure the 

PWR

 and 

SYS

 LEDs are lit steadily and that the 

relevant LAN

 LED is lit. 

The WLAN LED will be lit steadily. 

 

 

Summary of Contents for BiPAC 7402G



















































































































































Reviews:

No comments