manualshive.com logo in svg

Billion BiPAC 7402G, User Manual, Page: 10 / 146

Share
Download
Billion BiPAC 7402G User Manual Download Page 10

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router  

 

 

Chapter 2: Installing the Router   

 

 

 

The Front LEDs 

 
 

 

1

2

3

4

LAN 

PPP/MAIL 

WLAN

ADSL 

SYS 

PWR 

LED 

Meaning 

1 

PPP / MAIL 

 
Lit steady when there is a PPPoA / PPPoE connection.  
Lit and flashed periodically when there is email in the Inbox. 
 

2 ADSL 

When lit, it indicates that the ADSL (Line) port is connected to the 
DSLAM and working properly.

 

3 

LAN Port 

1X — 4X 
(RJ-45 connector) 

 
Lit when the LAN link is connected to an Ethernet device.   
Green for 100Mbps; Orange for 10Mbps.

 

Blinking when data is Transmitted / Received. 

 

4 

 

WLAN  

 

Lit green when the wireless connection is established.  
Flashes when sending/receiving data. 

5 SYS 

 

Lit when the system is ready. 

6 PWR 

 

Lit when power is ON.

 

 

 

 

 

 

6

Summary of Contents for BiPAC 7402G



















































































































































Reviews:

No comments