Billion BiPAC 7202 User Manual Download

Page: 7 / 96

addresses, including subnet masks and DNS IP addresses and distributes them to local

computers. This provides an easy way to manage the local IP network.

Rich Packet Filtering

This feature filters the packet based on IP addresses as well as Port numbers. Filtering

packets to and from the Internet provides a higher level of security control.

Static and RIP1/2 Routing

An easy static routing table or RIP1/2 routing protocol supports routing capability.

Simple Network Management Protocol (SNMP)

SNMP allows convenient remote management of the router.

Web-based

GUI

A web-based GUI offers easy configuration and management. User-friendly and with on-line

help, it also supports remote management capability for remote users to configure and

manage this product.

Firmware Upgradeable

You can upgrade the router with the latest firmware through its web-based GUI.

Summary of Contents for BiPAC 7202

































































































Search results

Summary of Contents for BiPAC 7202

Reviews:

Related manuals for BiPAC 7202

Brands by name

Popular brands

Billion BiPAC 7202, User Manual

Search results

Summary of Contents for BiPAC 7202

Reviews:

Related manuals for BiPAC 7202

Brands by name

Popular brands