Billion BiPAC 7202 User Manual Download

Page: 14 / 96

Chapter 3

Installation

You can configure the BiPAC 7202 Series router through the convenient and user-friendly

interface of a web browser. Most popular operating systems such as Linux and Windows

98/NT/2000/XP/Me include a web browser as a standard application.

3.1 Before Configuration

PCs must have a properly installed Ethernet interface and connect to the router directly or

through an external repeater hub. In addition, PCs must have TCP/IP installed and

configured to obtain an IP address through a DHCP server or a fixed IP address that must be

in the same subnet as the router. The default IP address of the router is

192.168.1.254

and

the subnet mask is

255.255.255.0

(i.e. any attached PC must be in the same subnet, and

have an IP address in the range of 192.168.1.1 to 192.168.1.253). The easiest way is to

configure the PC to obtain an IP address automatically from the router using DHCP. If you

encounter any problems accessing the router’s web interface you are advised to

uninstall

any kind of software firewall on your PCs, as they can cause problems accessing the

192.168.1.254 IP address of the router.

Please follow the steps below for installation on your PC’s network environment. First of all,

check your PC’s network components. The TCP/IP protocol stack and Ethernet network

adapter must be installed. If not, please refer to your Windows-related or other operating

system manuals.

Any TCP/IP capable workstation can be used to communicate with or

through the BiPAC 7202 Series. To configure other types of

workstations, please consult the manufacturer’s documentation.

Summary of Contents for BiPAC 7202

































































































Search results

Summary of Contents for BiPAC 7202

Reviews:

Related manuals for BiPAC 7202

Brands by name

Popular brands

Billion BiPAC 7202, User Manual

Search results

Summary of Contents for BiPAC 7202

Reviews:

Related manuals for BiPAC 7202

Brands by name

Popular brands