33
4.2.3.1 Half Bridge
Name:
Enter the name of your Internet Service Provider
Mode:
Select Routing (default) or Bridge
Encapsulation:
select Bridge in the Mode field, select either PPPoA or RFC 1483.
select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or PPPoE.
Multiplex: Select the method of multiplexing used by your ISP. Choices are VC or LLC.
Virtual Circuit ID:
VPI and VCI define a virtual circuit.
VPI: The valid range for the VPI is 0 to 255
VCI: The valid range for the VCI is 32 to 65535
ATM QoS Type:
Select
CBR
to specify fixed (always-on) bandwidth for voice or data
traffic. Select
UBR
for applications that are non-time sensitive, such as e-mail. Select
VBR
for burst traffic and bandwidth sharing with other applications.
