- Page 4 -
WARNING
• Both side braces must be positioned at the same height on the frames so that platform is
level.
• Be sure all 4 Saf-T-Lok
®
pins are fully engaged in holes of end frames.
• Be sure all 4 Saf-T-Loks are in the locked position.
STEP TWO
—
Attach second side brace
B
to both end frames
A
following the same Step One
sequence.
STEP ONE
—
Attach side brace
B
to two end frames
A
by
following this sequence:
- Pull Saf-T-Lok
®
pin at each end of side brace to the
disengaged position. (see decal)
- While holding lock pin in disengaged position, place U-
Channel on each end of side brace
B
around leg of end
frame
A
at desired platform height.
- Release lock pin and be sure that pin fully engages into
hole in end frame leg.
- Push in and rotate Saf-T-Lok
®
counter clockwise until U-
shaped end clears the brace locking pin support bracket
as shown (LOCKED).
- To release, push in and rotate Saf-T-Lok
®
clockwise until
U-shaped end unseats from around the brace locking pin
support bracket as shown (UNLOCKED).
For proper assembly, your basic Pro-Jax Utility Scaffold
must be comprised of 13 individual parts (plus guard
rail panels when required).
Letter
Part
Qty.
A
End Frame
2
B
Side Brace
2
C Platform
1
D
5” Caster
4
E
2” Snap Pin
4
C
B
A
B
A
E
D
ASSEMBLY INSTRUCTIONS
BUILDING A ONE FRAME HIGH SCAFFOLD
0202-0506
CTO
WARNING
L
Patents Pending
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
PLATFORM COLLAPSE CAUSING SERIOUS INJURY OR DEATH.
Do not use in this position
Work position
1. Check to be sure brace locking pin is fully
engaged into frame leg.
2. Push in and rotate Saf-T-Lok
TM
counter
clockwise until U-shaped end clears the
brace locking pin support bracket as
shown (LOCKED).
3. To release, push in and rotate Saf-T-Lok
TM
clockwise until U-shaped end unseats from
around the brace locking pin support
bracket as shown (UNLOCKED).
© Bil-Jax, Inc. 2004
0202-0506
CTO
WARNING
L
Patents Pending
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
PLATFORM COLLAPSE CAUSING SERIOUS INJURY OR DEATH.
Do not use in this position
Work position
1. Check to be sure brace locking pin is fully
engaged into frame leg.
2. Push in and rotate Saf-T-Lok
TM
counter
clockwise until U-shaped end clears the
brace locking pin support bracket as
shown (LOCKED).
3. To release, push in and rotate Saf-T-Lok
TM
clockwise until U-shaped end unseats from
around the brace locking pin support
bracket as shown (UNLOCKED).
© Bil-Jax, Inc. 2004
