Bil-Jax 45XA, Operator'S Manual

Page: 26 / 52

BILJAX 45XA
24
OPERATION: PLATFORM CONTROLS OPERATION: DRIVE FUNCTIONS

Fully lower the boom onto the boom rest to
position the platform for boarding. Turn the key
switch to the platform control position.

Raise the safety bar and enter the work
platform. Put on the safety harness and attach
the lanyard to the Fall Protection Attachment
Point on the side of the platform support beam.
Use the platform control panel to operate the boom
lift functions.

To raise, lower, extend and rotate the boom,
press the desired function button.

An LED adjacent to the function button will
become lit, indicating that the function is active.

Depress the trigger on the platform controls
joystick and move the joystick off center. Moving
the joystick further off center will increase
function speed. Moving the joystick toward
center will decrease function speed. Returning
the joystick to center and/or releasing the trigger
will stop boom functions.

Use the color-coded direction arrows to
determine the direction the boom will move.

To rotate the turntable, depress the trigger on
the platform controls joystick and use the toggle
switch located on top of the platform controls
joystick. While pressing the toggle switch and
the trigger, move the joystick off center to adjust
function speed.

Use the toggle switch and the color-coded
direction arrows to determine the direction the
turntable will rotate. The turntable will rotate in
the desired direction regardless of which
direction the joystick is moved off center.

Should the platform become tilted out of the
normal vertical axis, use the
PLATFORM TILT
function to adjust.

Monitor the Battery Condition Indicator during
operation and charge the batteries as
necessary.

Always fully retract, rotate and lower the boom
to the stowed position before exiting the
platform.

To drive machine, use the platform controls to
raise all outriggers to a fully stowed position.

Verify that the drive mode LED is lit.

Depress the trigger on the platform controls
joystick and move the joystick off center. Moving
the joystick further off center will increase drive
speed. Moving the joystick toward center will
decrease drive speed. Returning the joystick to
center and/or releasing the trigger will stop drive
functions.

To steer, use the toggle switch on the top of the
platform controls joystick.

Use the color-coded direction arrow to
determine the direction the machine will move.