Step 6
When the cyclist has taken a seat on the Position Simulator the actual measurement can start.
1
The hands are positioned on the break levers.
2
The shoes are locked into the pedal system.
3
After having found the correct position on the saddle, it is important that the cyclist stays in this position during
the whole measurement.
4
The left crank should be fi xed by placing the locking pin through the hole in the crank into the fi xation pipe of
the vertical tube.
5
The left pedal should be fi xed in a horizontal position.
6
The knee stop should be placed in and against the holder on the horizontal tube. Furthermore, the knee stop should be
turned into the direction of the front of the knee.
7
If the stop is behind or in front of the knee, the black nut should be turned in such a way that the front of the knee and the
brass knee stop are in connection with each other.
8
Repeat point 4 to 7 for the right knee.
9
If there is a difference between the left and right knee position, you have to take the average of both measurements.
10
Read the seat angle at the end of the horizontal outside tube and type the data into the Professional online program
and compute the custom drawing.
MANUAL POSITION SIMULATOR
Copyright© 1996-2007 bikefitting.com b.v. All rights reserved.
Summary of Contents for Position Simulator
Page 1: ......
