d. Check the current headset number:
In ready state, press [C] for 6 seconds and a voice notification will
announce the current assigned number.
Note: Make sure the number of times the LED flashes green is the same as
your assigned number. If they do not match, repeat the above (a), (b), (c) steps
to assign the numbers again.
9.2.2
Group Intercom Pairing
The pairing must follow the assigned number done in 9.1.1, and sequentially
pair each pair of ALOHA#1 and ALOHA#2, ALOHA#2 and ALOHA#3,
ALOHA#3 and ALOHA#4, ALOHA#4 and ALOHA#5, respectively. After
finishing pairing, a group intercom among the 5 headsets can be started (refer
to 9.2).
Pairing for Group Intercom:
a. Pairing between ALOHA#1 and ALOHA#2:
Note
：
The distance between two headsets must be less than 2 meters.
ALOHA#1: in ON state, press [C] until LED flashes red rapidly.
ALOHA#2: in ON state, press [M] until LED flashes red/blue.
At this point, the two headsets start to pair.
Completing pairing:
ALOHA#1: LED flashes in blue-blue-green pattern , and voice
notification “member2 paired”
ALOHA#2: LED flashes in blue-blue-green pattern , and voice
notification “member 1 paired”
At this point, the pairing is successful and the two headsets can
intercom with each other.
b. Pairing between ALOHA#2 and ALOHA#3
(Refer to: a. Pairing between ALOHA#1 and ALOHA#2)
