8.3
Voice Activation (VOX)
8.3.1
VOX Level:
The ALOHA headset provides five volume levels for setting the voice volume
required to activate the intercom connection. It is possible to adjust the
required voice volume according to your needs. Level 1 means that VOX has a
lower activation threshold, i.e., you may use a lower voice volume to activate
the headset intercom connection. The higher the level is, the higher the voice
volume required to activate the intercom connection. The indicated speeds are
only for reference, and level selection depends on actual ambient noise levels
and wind speed.
Level 5 is also the manual mode:
VOX Level Control:
1.
Turn ALOHA headset on (i.e., ready to connect) without transmitting any
voice signals (i.e., turn off cell phone music playback and FM, and stay
silent for 15 seconds to leave the intercom mode).
2.
Press [P] upward or downward for 2 seconds to adjust and then release [V].
Different voice notifications will be provided to indicate the transition from
a level to a different level. The following gives the details:
VOX Level 1
Description:
When in VOX activation Level 1, a voice notification saying “VOX
sensitivity Level 1”.
Note: if ambient wind can activate the intercom, noise sensitivity is too great so
a higher level must be used.
VOX Level 2
Description:
When adjusting to Level 2, a voice notification saying “VOX
sensitivity Level 2”. Note: if ambient wind can activate the intercom, noise
sensitivity is too great so a higher level must be used.
VOX Level 3
Description:
When adjusting to Level 3, a voice notification saying “VOX
sensitivity Level 3”. Note: if ambient wind can activate the intercom, noise
