Operating manual No.
057-2-6-0009-R0
Page 20
Version 2018
EN
7
Operation section
Before starting any maneuver, make sure that there are no other people in the immediate
vicinity of the machine.
Before starting to use the shock absorber dismantler, make sure that it has been well fixed to
the ground using the four holes in the base of the structure
(Figure 2-holes in the base of the
structure)
Check the correct operation of the shock absorber dismantler by carrying out a series of
maneuvers with no load, using the control lever.
The shock absorber dismantler is equipped with a safety hook; in order to carry out
any type of maneuver by using the control lever, it must be tightened to the ferrule
located on the back of the hook, by screwing the ferrule in order to activate the
pneumatic safety system.
Figure 2-holes in the base of the structure