Operating Manual no.
057-2-6-0017-R0
P. 15
Version 2021
EN
The operators standing areas must always be kept clean and free of any oily residues to allow an
easy and safe passage.
The putting out of service of the protection and safety devices for protecting the operators is the
sole responsibility of the Purchaser or the Machine's user.
Finally, we remind you that the handling, installation, use, maintenance and decommissioning of
the machine represent a source of hazard if these operations are not performed in compliance
with the requirements of this Manual or without the necessary caution and attention required.
(More details regarding the Risk Assessment to be requested from the Manufacturer).
3.4
Operator protections
Before starting any type of work on the lift, the operator must wear
appropriate personal protective equipment (PPE), such as gloves and safety
footwear.
Always wear work clothing normally used in the mechanical workshop
activity.
3.5
Safety systems
The machine is equipped with a button panel consisting of two buttons with maintained action
allowing the ascent and descent of the lift. Once the controls are released the lift stops instantly.
The button panel is equipped with a safety system that stops the operation of one of the two
buttons if the other is activated.
Figure 3 – Button panel for the ascent/descent control
ASCENT
DESCENT
