Bike-Lift HQL 400, Use And Maintenance Manual

Page: 18 / 35

Operating manual No. 057-2-6-0012-R0 Page 18
Version 2021
EN
4 Transport and handling section
4.1 Transport, handling and storage
CAUTION: Disseminate the instructions described in this chapter to all personnel
involved in the transport and handling of the machine.
For safety reasons, the moving parts must be locked before transport.
4.2 Packaging and transport
The machine is packed for transport directly from the Manufacturer.
The machine is supplied assembled with a cardboard packaging.
4.3 Unloading and handling
All lifting and unloading operations must be carried out in compliance with current safety
regulations.
The cardboard packaging must be lifted using a forklift truck, by inserting the forks inside the
wooden supports.
It is recommended that the unloading or handling operations to be carried out with a
forklift truck by a single Operator equipped with workshop gloves, safety footwear and
protective helmet, as required by current regulations.
This Operator must pay maximum attention to all transport phases.
Do not allow any other person to stand in the operation area of the forklift truck in
order to prevent the accidental fall of the boxes.
4.4 Receipt and check
The packaging is made of suitable material and is carried out by expert personnel, but during the
journey it is possible to be deteriorated or damaged.
Upon receipt of the machine, immediately check if the packages are clearly damaged.
If so, accept
the goods with reserve, by making photographic evidence of any damage.
Open the box by cutting the clips and the closing adhesive tape.
Make sure all the material shown on the delivery note is actually present.
Make sure the parts of the machine have not been damaged during transport and notify, within 5
days of receipt, any damage to the Carrier by REGISTERED LETTER (and notify Bike Lift Europe s.r.l.),
by presenting photographically documented evidence.