Bike-Lift HQL 400, Use And Maintenance Manual

Page: 16 / 35

Operating manual No. 057-2-6-0012-R0 Page 16
Version 2021
EN
and descent maneuvers.
In order to carry out the descent maneuver correctly, it is necessary to unhook the tongue present
under the work surface. Once the work surface reaches the end of the stroke or is resting on the
base of the lifting platform, it is necessary to refasten the tongue
The personnel who are not in charge of using the lifting platform for motorcycles, custom
motorcycles and quads must not pass or stand in the operating area of the machine.
The machine must always be operated by only one Operator.
Once the motorcycle is loaded on the lifting platform, make sure it is centrally
supported by the kickstand, and then fasten it securely with safety belts by passing
them through the appropriate loops on the lifting platform.
GIVEN THE BEARING VALUE INDICATED ON THE PLATE:
Do not exceed the load capacity of the lifting platform;
Use it only to lift objects;
Do not modify the lifting platform;
The load must always remain firm and stable.
3.6 Pictograms
Danger of crushing hands with the lifting platform arms.
When the platform is at the desired height, insert the locking bar to prevent it from
falling down accidentally.
Load the vehicle only when the platform is completely lowered;
In order to make the machine safe during the ascent phase:
1- Allow the anchoring bar to move freely around the internal perimeter of the kickstand;
2- When the selected position is reached, leave the bar hooked; this will act as a mechanical
stop in case of an uncontrolled fall of the structure.
In order to make the machine safe during the descent phase:
1- Keep the toothed bar uncoupled while the piston exhaust is operating.