BIJUR DELIMON INTERNATIONAL
(919) 465 4448
LOCAL
(800) 631 0168
TOLL-FREE
(919) 465 0516
FAX
WWW.BIJURDELIMON.COM
2100 Gateway Centre Blvd., Suite 109
Morrisville, NC 27560
35994 • R2
08/15
1
DP33 Pump
60:1, 3+3, Air-operated, Grease
General
The DP33 Pump is a compressed air-operated reciprocating piston pump designed to pump all types
of mineral greases. Suitable for installations with medium length piping to supply up to three grease
outlets simultaneously. This pump is mounted directly on 120 lb and 400 lb drums.
Operation
This pump is self-priming. To prime it the fi rst time, connect the air supply to the pump while keeping
the outlet gun opened and increase the air pressure from 0 to the desired pressure slowly using a
pressure regulator. Once grease starts fl owing through all the outlets, the pump is primed. The pump
starts to pump automatically when the outlet valve is opened.
(Note: It is important that the lower
valve does not come into contact with contaminated surfaces, such as a workshop fl oor, as it may
become contaminated with dirt or foreign particles that can damage the pump mechanism.)
Technical Data
Maximum Air Pressure
140 psi (10 bar)
Minimum Air Pressure
40 psi (3 bar)
Maximum Delivery @ 100 psi
2.6 lb (1200 gr/min)
Air Inlet Thread
3/8” BSP
Grease Outlet Thread
3/8” BSP
Air Piston Diameter
3” (75mm)
Air Piston Stroke
3” (75mm)
Installation
To install the pump on the drum, use the
included bung adapter. Fasten the cover
(part #F1936 for 120 lb keg and part #F1938
for 400 lb drum) onto the drum and screw the
nut of the bung adapter into the 2” bung
opening of the cover. Insert the pump through
the nut and fi x it with the star nut to the desired
height.
Always keep fi ngers and hands away from
moving parts. Do not dent or damage the
riser tube.
Ensure that the mounting surface and
attachments are strong enough to
support the lift and pump assembly
during operation.
