Washer (6x13mm)
Washer (6x13mm)
Nut (6mm)
Screw (6x45mm)
Nut (6mm)
5.2mm
Blind Nut
3
Screw(4x25mm)
3
1
Blind Nut (4mm)
Main landing gear
3
1
Blind Nut (4mm)
Main landing gear
Washer (6x13mm)
6
3
Screw (4x25mm)
2
Screw (6x45mm)
2
Wheel (90 mm)
4
Nut (6mm )
Make sure to glue securely.
If not properly glued, a failure in flight may occur.
Temporarily fasten down the main wing and
check its correct position.
Securely glue together.If coming off during flihts,
you'll lose control of your airplane which leads
to accidents!
C"
D"
C
D
C = C"
D = D"
1
Stab joiner (16x260mm)
Install the main landing gear.
Assemble the wheel to the landing gear.
The sketch map when the landing gear install completion.
Epoxy the horizontal tail to the fuselage and take care
to keep it clean.
Assemble the horizontal tail, Vertical tail separately.
34
33
35
36
37
7
Accessory list for the coming installation steps.
18mm
3mm
Washer(3x15mm)
Washer
Screw (3x35mm)
2
2
Washer(3x15mm)
Lock Nut (3mm )
1
Screw (3x65mm)
16mm
2
2
2
Clevis
Copper joiner
Aluminum tube(3x6mm)
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
Steel wire
Copper joiner
Aluminum tube
Lock Nut (2mm )
Screw (2x10mm)
Ball joint
Washer(2x5mm)
Rod (2x300mm)
Clevis
Washer(3x15mm)
Washer
Lock Nut (3mm )
Screw (3x35mm)
Screw (2x10mm)
Elevator.Connect the linkage rod to the horn.
Install the rudder servo.
Mount the rudder servo in the fuselage.
The position of the rudder control horn.
Install the elevator servos in the fuselage.
The position of the elevator control horn.
50
51
52
53
54
10
49
