Screw (3x20mm)
Screw (3x30mm)
2
Screw (3x20mm)
2
Screw (3x20mm)
Nut (3mm)
2
3.2mm
Nut (3mm)
2
Nut (3mm)
329.5mm
64mm
Cut away the surplus parts of plastic cover
carefully along the shaded line.
Glue windows to openings on fuselage.
Find out the marked position in the wing and drill a hole,
set nut in it.
Fix one side of the strut with screw.
Find out the marked position in the fuselage,drill a hole ,
set nut in it and fix the wing strut.
Cut away surplus part along the shaded area carefully.
61
62
63
64
65
12
60
3mm
Rudder
Make sure hinges are
mounted in the same line.
1mm
Tailing
edge
Make sure they are in
the right position while
installing.
3
TP Screw (3x20mm)
25mm
Tail gear supporter
Tail landing gear
Note:rudder wheel in optional.
Collar
Collar
Screw (8x6x25mm)
Nut (6mm)
Collar (3mm)
2
1
1
1
Tail landing gear(3mm)
Tail gear supporter(14x2 2x25mm)
Tail wheel (45mm)
3
TP Screw (2.6x14mm)
1
Screw (8x6x25mm)
1
Nut (6mm)
1
Stab joiner (16x260mm)
9
Pin hinge(24x24mm)
4
Wooden dowel (4x30mm)
1
Rib template (3mm ply)
TP Screw (3x20mm)
Bend tail gear wire to attach rudder.
Assemble the wheel to the tail landing gear.
Install the tail landing gear.
Apply instant type CA glue to rudder and pin hinge.
Keep some space with 1mm width between tailing edge
and rudder as below.
22
23
24
25
26
5
Accessory list for the coming installation steps.
