Use
Protection
Things to check before you start
Ɣ
Please dispose all plastic bags carefully and keep it away fro m children.
Ɣ
Check the part and make sure you have all of the parts listed. If not, contact our customer service department who will be able
Ɣ
Take a few moments to familiarize yourself with the contents & before starting check all holes are clear of any paint residue.
Ɣ
When you are ready to start, make sure that you have plenty of space and a clean dry area for assembl y.
IMPORTANT -
Whilst every care is taken in the manufacture of this product, care must
be taken during assembly in case sharp edges are present.
Lighting procedures
Ɣ
Put the pellet grid into the combustion chamber.
Ɣ
Set the pizza oven up in a suitable position, on a level surface away from areas likely to catch fire. The base of the grill will get
hot so ensure it stands on a suitable surface.
Ɣ
Place the pellets on the pellet grid and ignite the pellets on the top with refillable butane utility lighter.
Ɣ
When the pellets are burning, put the combustion chamber into the body through the handle.
Ɣ
Close the door so that the pellets burn completely to bake the pizza.
Ɣ
When burning is established spread the fuel out evenly.
WARNING!
The pellet will be very hot so take suitable precautions.
Ɣ
Never touch metal parts which may be hot.
Ɣ
Do not cook before the fuel has a coating of ash.
Before each cooking session
Ɣ
To prevent foods from sticking to the pizza stone, please clean the pizza stone before each use.
Ɣ
Fill the pellet fuel compartment with pellet, light the pellet and allow the pellet to become red-hot. It is recommended to
wait for at least 18 minutes before cooking. Once the pellet has turn ash grey it is now ready to be used for cooking.
Replenishing the pellet
Ɣ
To replenish the pellet during use, use the handle to open hopper assembly lid,
then use the hopper shovel to take some pellets
and pour them into the hopper assembly. Place the hopper assembly lid back
on the hopper assembly with the handle.
Ɣ
During cooking, keep the pellet in hopper assembly more than half capacity of the hopper assembly.
Ɣ
Make sure oven gloves or mitts are used.
Extingushing the pizza oven
Ɣ
Ɣ
Ensure that the pizza oven has cooled down completely before removing charcoal ash.
3
01
02
03
06
05
04
to help you.
Do not leave handle on the pizza oven.
Ɣ
Take out the pellet grid and fire box assembly(E&G) and use water to extinguish the fire when finished the cooking.
Pour the remaining hardwood pellets into a bucket of water.
Ɣ
Always use heat resistant gloves when handling the product.
