9
Connecting to AC200 Portable Power Station
Install power cord for AC200 power station
This power cord is using the XT90 connector which is compatible with the Bluetti AC200 . The end of the
cable can be cut off of to be connected to a different type of battery power pack if desired.
Note below how the power cable plugs into the Bluetti AC200 power cable in step 2. Then in step 3 insert the
blue connector as shown . Not that no blocking diode is needed here because the BLUETTI AC200 has a built
in blocking diode as do most portable power stations / solar generators .
PPG-R500-BD-PDB Dual DC Generator System OWNER'S MANUAL Revision 1.0 © 2017
Http:PedalPowerGenerator.com
