10
Turn on Bluetti
Turn on the Bluetti AC200 by pressing the main power button
Note that the screen will turn on as shown below and that the PV power indicator is what will show the power
coming from the bike generator.
Get on the bike generator and ride
At this point it is very important to start riding at a fast pace that you can maintain for an hour. This will allow
the maximum power point tracking system built into the power station to best deliver charge into the lithium
battery inside your power station .
NOTE: It will take 20 to 60 seconds to see power on this screen because it takes the MPPT charge controller
while to monitor your output and start working. At the first moment you start to pedal you will not feel any
resistance. It will be very easy to pedal. But then as you go on it will get harder and harder to pedal. Keep at
a steady pace and allow the MPPT charge controller to do its job.
PPG-R500-BD-PDB Dual DC Generator System OWNER'S MANUAL Revision 1.0 © 2017
Http:PedalPowerGenerator.com
