Basic Alarm Setting
Tone setting
Tone setting means the alarm system will make “beep” sound, when
detects system event, such as telephone line cut, Arm/Disarm,
Temperature Alert.
Siren Setting
Tone Setting
Arm/Disarm Tone
Off >
Arm/Disarm Beep
Off >
Push “
◀▶
” to choose “OK” to save
Call in Setting
The system can receive the phone call via GSM. It allow user to set the
ring times from 1 to 9. When the ring time reach to preset times, it will
pick up the phone call for remotely control
Call in Setting
Program&Delete
GSM Call in Tone
3
Push “ ” to delete exist data. It accpets ring time between 1-9. Push
“OK” to save.
Program&Delete
Use this function to program/delete wireless sensors and accessories
(remote keyfob,wireless LED/LCD keypad). The wireless zone number is
from 00-30. Zone 00 is for programming wireless remote keyfob or
leypads.
Basic Alarm Setting
Call in Setting
Program&Delete
Zone No
00
Program
Delete
Success
Push “ ” to delete the zone number, and input new zone number from
00-30 and push “OK”. push “
” to choose [program], then push “OK”,
the LCD will display [programming]. Trigger the wireless sensors for two
times, the LCD display [Success], push “OK” to save, you can continue to
enroll more sensors.
Push “ ” to delete the zone number, and input new zone number from
00-30 and push “OK”. push “
” to choose delete, the LCD will display
[Success], push”OK” to save. This will erase the current sensors in the zone
from the alarm system.
Zone Attribute
The system has advanced zone attribute, it allow user to choose each of
attribute for the zones, it helps user to customize the system, which can
be more suitable fot speciÞc installation. Ensuring the zones with correct
attribute, therefore sensors can work properly.
Zone No
00
Zone Attribute
Upload
Activate >
0 Defence Line >
00Help >
Alarm Delay Off >
Zone Chime Off >
Smart Sensor Off >
7
