Bigeyes BE-X9, User Manual, Page: 7 / 34

Basic Alarm Setting
Record Voice Memo
The system allows user to record up to 10 seconds voice memo. When
alarm phone call is picked up, press “5” to listen the voice memo.
SMS Setting
Record Record
OFF >
Recording Time
10
Push “
◀▶
” to choose “On” torecord voice, and push “OK” to start voice
recording.
Arm Delay/Exit Delay
The Arm delay or exit delay can allow user to exit protected area before
system is Armed. The time is adjustable from 00 to 59 seconds.
Arm Delay
Alarm Delay Arm Delay
10
Push “ ” to delete default data, and enter new time. push “OK” to save.
Alarm Delay/Entry Delay
The alarm delay or entry delay can allow user to set alarm delay zones
before system set alarm off. This allow user enter into specific detection
area to disarm the system without triggering alarm.
Basic Alarm Setting
Arm Delay
Alarm delay Alarm Delay
10
Push “ ” to delete exist data, and input new seconds (e.g 10). lt accpet
time between 00-59. push“OK” to save.
Notice: You need go to [Zone attribute] to enable which zones are belong
to this function, therefore it can work.
Siren Setting
It allows siren time setting for each zone. The siren time can be set from
00-59 minutes. User can choose whether use built-in siren or not.
Siren Setting
Tone Setting Zone No.
00
Siren Time
01 Built-in Siren
On >
Push “ ” to delete the zone number, and input new zone number from
00-34. Touch “OK” to save
Push “ ” to delete the siren time, and input new siren time, “00” means
disable. Default value is 01
Push “
◀▶
” to choose “On” to enable built-in siren, and touch “OK” to save.
6