28
Power on failure
Solution
Troubleshooting
Troubleshooting
Check the following before calling your dealer or service center:
Plug the power cord of your projector in an AC socket.
Make sure the POWER light indicator turns red.
Restart your projector until the POWER light indicator turns red.
It indicates your projector is ready for power on again.
Check the lamp.
Disable the Key Lock function of your projector.
Logo screen display failure
Make sure the Off and Countdown Off is selected in the Display
function.
The Logo screen differs
from the standard settings.
Make sure you did not select User or Off in the Logo Screen.
Input signal switch (or do
not switch) automatically.
Make sure you have correctly set up the Input Search function.
Press INPUT button during
power on and a non-input
mode icon displays.
This is a lter or lamp replacement alerts.
A non-input or lamp mode
icon displays.
This is a lter replacement alerts.
Image looks fuzzy
Adjust focus of your projector.
Provide proper projection distance.
The projection lens requires cleaning.
Moving your projector from a colder environment to a hotter
one may result in condensing on the lens. If this is the case,
wait until the condensing water evaporated before powering
on your projector.
Image mirror reected
Image turns upside down
Check the Ceiling and Rear settings.
Check the Ceiling settings.
