ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
Step 2
With assistance from another adult, place Left side panel (D) onto its side.
Insert the tenons of Side trim (F) into the corresponding holes of Left side
panel (D). Secure Side trim to Left side panel (D) with Long bolt (H1),
Spring washer (H3) and Flat washer (H4) using Allen wrench (H5) as
shown in figure 2. DO NOT fully tighten bolts in this step for later
adjustment. Repeat process to attach remaining Side trim (F) to Right side
panel (E).
D
F
H3
H4
H1
H5
B
D
E
B
D
H2
H3
H4
H5
Figure 2
Figure 3
Step 3
With assistance from another adult, insert the tenons of Left side panel
(D) into the corresponding holes of Base (B). Secure Left Side panel (D)
to Base (B) with Short bolt (H2), Spring washer (H3), Flat washer (H4)
using Allen wrench (H5) as shown in figure 3. DO NOT fully tighten
bolts in this step for later adjustment. NOTE: The Left side panel (D)
should be supported until secured in place to prevent the panels from
tipping and causing damage or injury. Repeat this process for the Right
side panel (E).
Trim on the side panel
should be on top.
Trim on the side panel
should be on top.
