ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
Step 6
Align the tenons of the Left support (H) and Right support (I) with the
holes in Front panel (C). The parts may need to be slightly adjusted for
Front panel (C) to fit properly. Secure Front panel (C) to Posts (G) with
Bracket (H7), Flat washer (H4), Spring washer (H3) and Short bolt
(H2) using Allen wrench (H5) as shown in figure 6. DO NOT fully
tighten bolts for later adjustment.
Figure 6
Figure 7
Step 7
With assistance from another adult, insert the tenons of Side rail (K) into
the corresponding holes of Base (B) with the glossy side facing the front
of the mantel. The holes in Left support (H) should align with the holes in
Side rail (K). Secure Side rail (K) to Left support (H) with Flat washer
(H4), Spring washer (H3) and Short bolt (H2) using Allen wrench (H5) as
shown in figure 7. DO NOT fully tighten bolts for later adjustment. Use
the same process to attach remaining Side rail (K) to Right support (I).
H2
H3
H4
H5
H7
C
C
H
I
G
G
B
B
C
C
K
H
I
B
K
K
H
I
K
H
H3
H4
H5
H1
G
H
I
C
