background image

The Free’n

®

 Easy Release

“The Line Release That Is The Favorite Of Successful

Charter Captains And Tournament Fishermen!”...

The Free’n Easy

®

 downrigger line release

is an “adjustable tension” line release that

will withstand greater tension from the

fishing rod than other line releases and still

trip easily from the lightest fish strike.
1. Adjust the tension screw turning it

    clockwise to strengthen the release

    tension, or turn it counter clockwise

    to lighten the release tension.
2. Once you have the tension set to your

    liking, lock the tension screw in place

    by turning the locking nut clockwise

    until it is set tightly against the body

    of the line release.
3. To attach your fishing line to the line

    release, start from the front of the

    release pin (the end nearest to the

    downrigger cable) and wrap the line

    around the release pin four times

    in a counter clockwise direction.
4. Press the release pin into the body

    of the release until it rests against

    the spring-loaded catch.
5. Lower the cannonball and lure to

    the desired fishing depth.
6. With your fishing rod in the rod holder,

    reel in the slack in your fishing line

    until your fishing rod bows under

    the tension.
7. When a fish strikes, it will pull the

    pin from the body of the release.

    The fishing line will then roll off

    the end of the release pin. When this

    happens you will see the fishing rod

    pop up from the bowed position.

 

Summary of Contents for Band Buster

































Reviews: