Big Daishowa DynaForce, Operation Manual

Page: 12 / 24

10
1. Specifications
1-1 Descriptions
● Measuring device ● Exclusive case
● Display unit
● Accessory cable
Connector
Jack to be connected through an accessory cable to the measuring device.
Power supply
Push the button to switch the power and backlight ON/OFF.
SET button
To be used as a decision button at the time of set up only.
ZERO/ button
To be used during set up such as entering values and for zero reset during measurement.
(Displays "ZERO" on the LCD.)
HOLD/ button
To be used for changing the number of digits, moving the decimal point or selecting peak hold mode during set up.
Battery box
2 pcs. of AA alkaline or manganese batteries are used exclusively.
LCD
Displays the measured value and status.
1
1
2
3
4
5
6
7
CAUTION
Do not use the [STRAIN] mode, as it is for error diagnosis by the manufacturer.
Pocket
for cable
Display side
(large)
Measuring device
side (small)
POWER
STRAIN MEAS
POWER
STRAIN
MEAS
Ser.No.
1
2
5
7
3
4
TYPE : DFA-1
6