CLEANING -MAINTENANCE
CLEANING -MAINTENANCE
CLEANING - MAINTENANCE
IMPORTANT: Pressure Cooker and its parts are NOT dishwasher safe. To ensure proper
operation of the unit, always clean the pressure cooker thoroughly after each use and
if it hasn’t been used for a long period of time. Use the below steps.
1. Unplug and always let the unit cool down before cleaning.
2. Wash the removable cooking pot with warm soapy water,
don’t use abrasive cleaners or pads. Make sure to clean
the bottom of the pot as well. Dry the outside thoroughly
before placing back in the pressure cooker.
3. Wipe the outer housing of the pressure cooker with a
clean damp cloth. NEVER submerge in water due to the
risk of the electric shock. Wipe the sensor located on the
inside bottom of the pressure cooker housing with damp
cloth. Always dry thoroughly.
4. Remove the Condensation Container by pulling it down.
Wash in warm soapy water, rinse and dry. Place the
Condensation Container back on the unit by pushing it up.
5. Next, clean the rubber gasket by first removing it from
the lid. Grasp the rubber gasket on either side and pull up.
Clean the rubber gasket in warm soapy water. Rinse and
dry thoroughly.
6. When done, place the rubber gasket back on the lid by pushing it down inside the
edge of the lid. Always make sure the groove in the center of the rubber gasket is
positioned around and behind the metal ring of the lid. IMPORTANT: If the rubber
gasket is not placed on properly, the unit will not operate.
7. The rubber gasket is always positioned on the inside of the lid, around and behind
the metal ring. Always check to make sure it’s clean and not damaged before each use.
8. If the rubber gasket is damaged in any way, DO NOT USE
the pressure cooker and contact customer service at
1-800-423-4248 for a replacement part.
20
19
Cleaning the Pressure Regulator Knob
Always make sure to check that the pressure regulator
knob and the pressure safety valves are not damaged
and working properly prior to each use.
1. Let the unit cool off completely, take the lid off.
2. While pressing down on the Pressure Regulator Knob,
turn it counter-clockwise past the STEAM setting to the
CLEAN setting. You should hear a click as it unlocks.
Remove the knob.
Press and turn
to unlock
