PLUG REPLACEMENT
Plug replacement
If you need to replace the fitted plug then
follow the instructions below.
Important
The wires in the mains lead are coloured
in accordance with the following code:
green & yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying
the terminals in your plug, proceed as
follows. The wire which is coloured
green
& yellow
must be connected to the
terminal which is marked with E or .
The wire which is coloured blue must be
connected to the terminal which is marked
with
N
. The wire, which is coloured brown,
must be connected to the terminal, which
is marked with the letter
L
.
Warning:
Never connect live or netutral
wires to the earth terminal of the plug.
Only fit an approved 13 Amp BS1363/A
plug and the correct rated fuse.
Note:
If a moulded plug is fitted and
has to be removed take great care in
disposing of the plug and severed cable,
it must be destroyed to prevent engaging
into a socket.
If the supply cord is damaged it must be
replaced by a service agent or a similarly
qualified person in order to avoid hazard.
