WWW.BIGASSFANS.COM © 2015 DELTA T LLC ALL RIGHTS RESERVED.
3
3b. Install oscillator assembly (two pedestals)
After securing the handle and second pedestal to the first pedestal, attach the oscillator assembly to the top of the
second pedestal. The inner portion of the oscillator enclosure has (4) weld nuts to which the bolts should attach.
Ensure the oscillator motor is oriented.
Proceed to step 4.
Lower Oscillator Hardware:
a. (4) 3/8-16 x 3/4” Hex Head Cap Screw
b. (4) 3/8” Washer
4. Install fan yoke
Secure the fan yoke to the oscillator bracket. Position the yoke so that the yoke handle is on the same side as the
oscillator motor.
Upper Oscillator Hardware:
a. (4) 3/8-16 x 3/4” Hex Head Cap Screw
b. (4) 3/8” Washer
a
b
One Pedestal
Two Pedestals
a
b
Yoke
Handle
Yoke
Handle
ATTENTION
If you are not installing two pedestals, skip this step and proceed to step 4.
