8’–24’ POWERFOIL
®
X2.0 & POWERFOIL
®
X2.0PLUS FANS
17
WWW.BIGASSFANS.COM ©2012 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
8’–24’ POWERFOIL
®
X2.0 & POWERFOIL
®
X2.0PLUS FANS
Mounting Method 2: Angle Irons (cont.)
5b. Attach main fan unit (to angle irons)
CAUTION: The main fan unit is heavy. Use caution when raising it.
Attach the main fan unit directly to the angle irons with the Motor Hub Hardware as shown. Consult the diagram below for distances
between the angle irons.
Note: The fan can only be directly mounted to angle irons. Do not directly mount the fan to an I-beam.
Tighten the bolts to
40 ft·lb (54.2 N·m)
using a torque wrench and 3/4” socket. After attaching the main fan unit to the angle irons,
tighten all the bolts securing the angle irons to the roof structure to
40 ft·lb (54.2 N·m)
using a torque wrench and 3/4” socket.
Proceed to “Secure Safety Cable” (p. 18).
Main Fan Unit Hardware (BAF-Supplied):
a. (4) 1/2-13 x 1 3/4” Bolt
b. (8) 1/2’’ Flat Washer
c. (4) 1/2-13 Nylock Nut
b
b
c
a
5 1/2”
(14 cm)
