BIG ASS FANS 8'-24' Powerfoil X Installation Manual Download Page 7

Page: 7 / 72

8’ - 24’ POWERFOIL® X

Introduction

Thank You

Thank you and congratulations on your Big Ass Fans purchase! You now have an efficient and cost-effective way to stay cool in the

summer and warm in the winter. The sleek revolutionary design of our fans will look great in any commercial or industrial setting.

More importantly, you can rest assured that you have a product that is backed by extensive research, thorough testing, and quality

manufacturing.

If you have any questions or comments, contact us at 1-877-BIG-FANS or visit our Web site at www.BigAssFans.com.

Who We Are and What We Do

FOUNDED IN 1999, Lexington, KY-based Big Ass Fan Company is the preeminent designer and manufacturer of high volume/low

speed (HVLS) ceiling and vertical fans designed to improve facility and worker comfort in large commercial, industrial, agricultural, and

institutional buildings worldwide.

Summary of Contents for 8'-24' Powerfoil X








































































Search results

Summary of Contents for 8'-24' Powerfoil X

Reviews:

Related manuals for 8'-24' Powerfoil X

Brands by name

Popular brands

BIG ASS FANS 8'-24' Powerfoil X, Installation Manual

Search results

Summary of Contents for 8'-24' Powerfoil X

Reviews:

Related manuals for 8'-24' Powerfoil X

Brands by name

Popular brands