Installation, Operation and Maintenance Manual
MAN712 Rev. 9
June 2021
Device Description
Section 4: Device Description
15
RS232 (Configuration Port)
Baud rate
115200 bps
Parity Bit
Even
Stop Bit
1
Hardware flow control
Off
Distance (cable length)
Max. 10 meters
Bluetooth (Configuration Port)
Baud rate
115200
Parity Bit
None
Stop Bit
1
Hardware flow control
On
Distance
Max. 10 meters
Various Characteristics
Operating Ambient Temperature
from -40 °C up to +75 °C
Expected Lifetime
10 years
NOTES:
1.
The display is ON.
2.
During the Pressure and Position Sampling (both sensors are supplied with the max power consumption)
with the display ON and considering the additional power for driving a DO (relay).
3.
20 mA of output by using the internal power supply.
4.
During the Safety Action with SVC1, SVC2, RL1 and RL2 configured as SOV Control Outputs, the display
ON and MODBUS, Bluetooth and RS485 enabled.
5.
Battery Pack is the unique power supply, the Sample Rate is greater than 10 seconds and one safety action
and a “normal” configuration time (10 minutes) are considered.
6.
Considering both the Supply Voltage and the internal resistor, the Pressure and the Position sensors must
accept the following Minimum Supply Voltage: 10
V DC
(2-wires sensors) and 12
V DC
(3-wires sensors).
7.
It depends on cable quality and on the wires dimension.
