Bierer Phasing Ranger 2 Operating Instructions Manual Download Page 14

Page: 14 / 16

PARTS & ACCESSORIES

PART NO.

DESCRIPTION

8128TBALB

15 -25kV Bushing Adapter

8128LHM

Hook Probe Adapter

8128LPM

Straight Probe Adapter

3403

Quick Change to Universal Adapter

3402

Quick Change to Grip All Adapter

10022CHL

Handle w/Threaded Ferrule and Cap

(2 required*)

10022HHSL

Handle w/Threaded Ferrule and

Ferrule w/Stud (2 or 4 required*)

PD800ANT

Antenna for Reference or Meter Probe

PD800SH2

Support Hook 2 ft., 51kV to 300kV

PD800SH4

Support Hook 4 ft., above 300kV

*Nominal one inch in diameter and two feet in length; handle assemblies may

be two, four or six feet in length.

Bierer & Associates Inc.

Manufacturing & Repair

10730 Farrow Rd.

Blythewood SC 29016

Tel: (803) 786-4839

Fax: (803) 786-5457

BiererMeters.com

Limit Mark

All Phasing Meters and Voltage Detectors manufactured after 2007 will

have a limit mark engraved on the high voltage probe(s) 2.5 inches from

the tip to indicate to the user the physical limit that should not be passed

when approaching and contacting an electrical conductor or other

electrical test points.

Summary of Contents for Phasing Ranger 2

















Search results

Summary of Contents for Phasing Ranger 2

Reviews:

Related manuals for Phasing Ranger 2

Brands by name

Popular brands

Bierer Phasing Ranger 2, Operating Instructions Manual

Search results

Summary of Contents for Phasing Ranger 2

Reviews:

Related manuals for Phasing Ranger 2

Brands by name

Popular brands