Safety Instructions
1
Important Safetyguards
When using electrical products, especially when
children are present, basic safety precautions
should always be followed.
Read All Instructions
Before Using
• For 120V 60Hz: Power supply must be a 15
AMP GFCI outlet.
• The electrical cord must be connected to a
GFCI outlet.
• The GFCI outlet should be 1ft. above the floor.
• Install only in well-ventilated areas to avoid
excess humidity.
• Do not install in narrow toilet stalls or in shower
stalls.
• Install only where direct contact with water is
minimized.
• Do not install near any heat source.
• Avoid using extension cords if possible. Consult
with a certified electrician where extension
cords are necessary.
Danger!
Reduce the risk of electrocution:
• Do not use while bathing.
• Do not place or store product where it can fall
or be pulled into a tub or sink.
• Do not place in or drop into water or other
liquid.
• Do not reach for a product that has fallen into
water. Unplug immediately.
Warning!
To reduce the risk of burns,
electrocution, fire or injury to
persons:
• Close supervision is necessary when this
product is used by, on, or near children or
handicapped individuals.
• Use this product only for its intended use as
described in this manual. Do not use
attachments not recommended by the
manufacturer.
• Never operate this product if it has a damaged
cord or plug, if it is not working properly, has
been dropped or damaged, or dipped into
water. Return the product to a service center for
examination and repair.
• Keep the cord away from heated surfaces.
• Never drop or insert any object into any
opening or hose.
• Do not use outdoors or operate where aerosol
(spray) products are being used or where
oxygen is being administered.
• Connect this product to a properly grounded
outlet only. See grounding instructions.
• Unplug this product before filling. Fill (reservoir)
with water only.
Grounding Instruction
Danger- Improper use of the
grounding plug can result in a risk
of electric shock.
This product has a three-prong grounding plug,
which must be plugged into an outlet that is
properly installed and grounded. In the event of
an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire
for the electric current. If repair or replacement of
the cord or plug is necessary do not connect the
grounding wire to either flat blade terminal.
The wire with insulation having an outer surface
that is green or with or without yellow stripes is
the grounding wire. Check with a qualified
electrician or service person if the grounding
instructions are not completely understood, or if
in doubt, as to whether the product is properly
grounded.
This product is for use on a nominal 120V circuit,
and has a grounding plug that looks like the plug
illustrated in sketch A in Figure 1.
A temporary adapter, which looks like the adapter
illustrated in sketches B and C, may be used to
connect this plug to a 2-pole receptacle as shown
in sketch B if a properly grounded outlet is not
available.
The temporary adapter should be used only until a
properly grounded outlet (sketch A) can be
installed by a qualified electrician. The green
colored rigid ear, lug, or the like extending from
the adapter must be connected to a permanent
ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be
held in place by the screw.
Optional Grounding Instructions
