How to Use Continued
4
Water pressure is adjustable. (5 levels)
If the water or screen filters become
blocked, it may cause low water
pressure. Regularly check the screen
filter.
6. Water pressure control
All operations will stop. When
pressing the Stop button for 3
seconds, the unit will be in sleep
mode. Press Stop, Wash, Bidet or
Power Wash to turn on. When
pressing the Stop button for 5
seconds consecutively, the unit
will be turned off and on
automatically and initialized. All
presets will be deleted.
7. Stop
When Selecting Child function, settings*
will be adjusted for children. 1 min Bidet
- 30 sec Bidet oscillating - 30 sec Bidet
Pulse - 2 min Dry work consecutively.
8. Child Function
9. Seat/Water
Temperature Control
Seat/Water temperature is
adjustable. (4 levels) (Off - Low -
Middle - High)
To reduce the chance of low
temperature burns, the seat has a
seat heater auto adjustment
function which turns to low
temperature (35 C, 95 F) when
seat is occupied for more than 15
minutes consecutively. If the seat
is set lower than middle level, the
seat remain at off or low level.
10. Energy Saving
Function
Automatic energy saving mode
-This mode will be activated by
pressing the Energy Saving button
until yellow LED lamp lights on. (Seat
and water temperature will be kept at
32° C)
Powerful energy saving mode
-This mode will be activated by
pressing the Energy Saving button
until green LED lamp lights on. (Seat
and water heater will be kept off)
Release of energy saving mode
-Press the Energy Saving button until
LED lamp turns off.
When the unit is occupied, it adjusts
to the preset temperature and it
returns to the saving mode when seat
is unoccupied.
If the seat and water temperature are
off, they will remain off.
11. Nozzle Cleaning
When selecting Nozzle Cleaning while
not seated, the nozzle cleans itself 3
times. Then nozzle extends and stops
for the manual cleaning process.
Clean the nozzle with a brush and
press STOP button after completion
of manual cleaning. Then nozzle
cleans itself 3 times and retracts.
Nozzle Cleaning will not operate if the
seat sensor is activated.
12. Automatic tank draining
To protect water contamination,
the water tank will be drained
(replaced) for 2 minutes if the
seat is not used for 48
consecutive hours.
This feature is deactivated from
the factory. To activate this
feature, press Stop and Water
Temp buttons for 3 seconds.
13. Sitz Bath
Wash or Bidet is switched to Wash
Sitz Bath or Bidet Sitz Bath if Nozzle
Cleaning button is selected during
Wash or Bidet operation.
Water Pressure is switched to 1st level
regardless of preset water pressure
setting and Sitz Bath operates for 5
minutes.
LED of Nozzle Cleaning turns on
during the operation of Sitz Bath.
Select the Nozzle Cleaning again to
switch to normal Wash or Bidet.
14. Seat Sensor Release
The seat sensor can be activated
and deactivated by pressing the
Pulse button for 3 seconds.
If the seat sensor is deactivated,
the unit works without
occupying the seat and
features* cannot be controlled.
*Features
Silent mode, Nozzle cleaning.
Press for more than 3 seconds
