I
SOL
A
IR
M
ANUAL
S
ERVICE
Manual version 1.1 (07-04-2016)
en-29
en
6.4.2 Adjusting room thermostat
The room thermostat determines at which temperature of the
front hall the unit will switch between the low mode and the
high mode.
Note:
n
If the temperature in the front hall is lower than the
set temperature, the unit will operate in the low
mode.
If the temperature in the front hall is higher than the
set temperature, the unit will operate in the high
mode.
1. Consult your Biddle advisor about the optimum setting of
the room thermostat for your specific situation.
2. Open the room thermostat.
3. Find the recommended temperature
on the white outer edge of the knob and turn the knob so
that the temperature is at the boundary pin.
Note:
n
Use the small white numbers on the outer edge, not
the big gray numbers.
4. Fix the button by placing the red jumpers to the immedi-
ate left and right of the recommended temperature.
5. Close the room thermostat.
Note:
n
Make sure the recommended temperature now is at
the arrow.
