I
NSTALLATION
C
OMFORT
A
IR
C
URTAIN
en-22
en
2.6.4 Fault signal output
A building management system (BMS) can be connected to the
output.
• The connector is located on the control circuit board
(HEALTHY connector).
Output operation
2.6.5 Unit settings
Optional unless otherwise stated
Several dip switches
1
are located on the unit’s control cir-
cuit board. These allow the unit to be configured.
Control circuit board settings
24 VDC
unit operates normally
no power sup-
ply voltage
temperature cut-out has turned the
heating off or the unit is not being pow-
ered
N
O
. P
OSITION
OFF
(
FACTORY
SETTING
)
P
OSITION
ON
1
fan and heating mode
independently adjustable
high heating setting disa-
bled for low and medium
fan settings
