BIC WINDSURF
FOIL
USER MANUAL
REAR WING
5. Remove the Foil from the board and place
upright on a protected surface. Place the
rear wing on the body, with the wing ends
pointing upwards, so that it fits snugly in the
rear insert. Line up the screw holes on the
wing with the inserts on the body, and gently
hand tighten the screws.
6. Screw the rear wing to the foil with the key provided, starting with the front screw, then the the
rear. Ensure that the wing is held snugly in place on the body during tightening. Screws should
be hand tight so that the wing is held firmly
in place without play.
Be careful not to over-tighten the screws.
